Home
Next Generation Soldier Technology
3 April - 4 April 2006
Next Generation Soldier Technology

Next Generation Soldier Technology 2006 will be an ideal forum to review updates on international soldier modernisation programmes and to discuss how best to provide our soldiers with key technology to enhance mobility, survivability and mission success. The current global military climate and trend towards lower intensity, smaller-scale conflict has led to an increase in the importance of the dismounted soldier. The range of tasks that the infantry are expected to perform is constantly growing and, subsequently to meet this multitude of often differing requirements, a new approach to the design and procurement of soldiers’ equipment has been adopted and must continue to evolve.

There will always be a need for troops to physically occupy the ground and to engage the enemy in close combat. The 5th event in our Future Soldier series, Next Generation Soldier Technology 2006, will provide an up-to-date review of soldier systems and technologies available. It will discuss the development of off-the-shelf purchases of next generation soldier systems, examining the current, as well as the future, capability of the dismounted soldier. This conference will look at the developing links within the international soldier modernisation community, incorporating country-specific case studies, key lessons learned and forthcoming plans.

The exceptional speaker line-up includes…

  • Colonel Per-Eric Gustavsson, Chairman, MARKUS Project, Swedish Armed Forces
  • Colonel Michael Russo, Chair, Cognitive Performance, Judgement, Decision-Making Research Program, US Army Medical Research and Materiel Command - Military Operational Medicine Directorate, Aeromedical Research Laboratory, US Army
  • Lieutenant Colonel Craig Oakley, Project Director, LAND 125 - Soldier Combat System, Soldier Support Systems Program Office, Land Combat Systems Branch, Land Systems Division, Defence Materiel Organisation, Australia
  • Major Howard Newson, SO2c FIST and Individual Systems – DEC GM, Ministry of Defence, UK
  • Commandant Eric Michiels, Directorate General Material Resources, Communication and Information Systems Division, Operations C3 Systems and Deployable Systems Section, Belgian Army
  • Colonel (Ret) Vince Goulding, Director, Sea Viking Division, US Marine Corps Warfighting Laboratory
  • Dr Steven Savage, Deputy Research Director, Department of Functional Materials, Swedish Defence Research Agency (FOI)
  • Frank Simonis, Director of Future Technology Centre, TNO Netherlands
  • Tim Young, Head of Unmanned Land Systems, QinetiQ
  • Philippe van Nedervelde, Executive Director, Foresight Nanotech Institute

SAE Media Group’s Next Generation Soldier Technology conference will…

  • DISCUSS international soldier modernisation programme requirements and future objectives
  • REVIEW the latest innovations in technology that are enhancing soldier capability
    EXAMINE soldier modernisation developments facilitated through R&D and new technology
  • ANALYSE system integration, interoperability and application issues and challenges
  • EXPLORE the use of nanotechnology for the next generation soldier

*Subject to final confirmation

Conference agenda

clock

8:30

Registration & Coffee

clock

9:00

Chairman's Opening Remarks

Danny Crossman

Danny Crossman, Director, Strategic Business Development, Med-Eng Systems

clock

9:10

PROJECT LAND 125

  • LAND 125 Soldier Modernisation Program – overview
  • Evolutionary enhancement
  • Technology and TTPs
  • User critical in development and evaluation
  • Warrant Officer Class 2 Brett Raymond  Corney

    Warrant Officer Class 2 Brett Raymond Corney , Trials Warrant Officer, Project Land 125, Australian Defence Material Organisation

    Major Robin Glyndwr Davies

    Major Robin Glyndwr Davies, Project Leader, Trials, Project Land 125 , Australian Defence Material Organisation

    clock

    9:50

    UK MOD’S VISION FOR ITS FUTURE SOLDIER SYSTEM

    Howard Newson

    Howard Newson, SO2c FIST and Individual Systems – DEC GM, DCC IPT

  • Update on Future Integrated Soldier Technology (FIST) and Personal Equipment and Common Operational Clothing (PECOC) programmes
  • Future Dismounted Close Combat programmes
  • Linking to the network
  • UK Next Generation Small Arms programme
  • Integration
  • clock

    10:30

    Morning Coffee

    clock

    11:00

    THE MARKUS PROGRAMME

    Per-Eric Gustavsson

    Per-Eric Gustavsson, Chairman, MARKUS Project, Swedish Armed Forces

  • A European perspective on future soldier plans
  • Analysing the capability requirements for the soldier in Sweden
  • The budget and timescale of present programmes
  • The MARKUS programme
  • Approach to the protection and information superiority of soldiers
  • Application of changes and results from test trials
  • Implementing tests for the future and the aims and objectives
  • clock

    11:40

    BELGIAN SOLDIER TRANSFORMATION FROM AN ARMY-C4I PERSPECTIVE

    Eric Michiels

    Eric Michiels , Directorate General Material Resources, Communication and Information Systems Division, Operations C3 Systems and Deployable Systems Section, Belgian Army

  • Scope of the BEST programme
  • NEC in the Belgian Army (focus on the C4I chain at tactical level)
  • BEST functionalities / equipment architecture
  • BEST choices and challenges
  • Radio communication (including frequency management)
  • SA and BFT
  • Vehicle integration
  • clock

    12:20

    Networking Lunch

    clock

    13:50

    COGNITIVE PERFORMANCE, JUDGEMENT, DECISION-MAKING IN NEXT GENERATION WARRIORS

    Michael Russo

    Michael Russo, Chair, Cognitive Performance, Judgement, Decision-Making Research Program, US Army Medical Research and Materiel Command - Military Operational Medicine Directorate, Aeromedical Research Laboratory, US Army

  • Review recent research by US Army Medical Research Command with regard to prevention of catastrophic failure, injury, and death by identifying and mitigating impairments in cognitive processing
  • Discuss the quantification of the cognitive effects of operational biomedical stressors, and how judgement and decision-making are being studied
  • clock

    14:30

    PRIMORDIAL SOLDIER

    Randy Milbert

    Randy Milbert, President, Primordial

  • Ground guidance: routing soldiers around combat obstacles
  • Unit detection: differentiating friend from foe in a helmet-mounted display
  • Target hand-off: enabling soldiers to quickly request fire support
  • United States Army funding: supporting the development of a geographically-enabled augmented reality system for dismounted soldiers
  • clock

    15:10

    Afternoon Tea

    clock

    15:40

    NEW DEVELOPMENT IN BALLISTIC VISOR APPLICATION

    Pierre  Vallée PEng

    Pierre Vallée PEng, Vice President Engineering and Manufacturing, Revision Eyewear Inc

  • Requirements review
  • Human factor design consideration
  • System integration
  • Ballistic characteristics
  • Optical characteristics
  • End-user validation
  • clock

    16:20

    RAPID DEVELOPMENT FOR OPERATION IRAQI FREEDOM

    Danny Crossman

    Danny Crossman, Director, Strategic Business Development, Med-Eng Systems

  • Rapid development of infantry protection
  • Transforming urgent operational needs into the proven solutions
  • Integrated armor versus armor components
  • clock

    17:00

    Chairman’s Closing Remarks and Close of Day One

    clock

    8:30

    Registration & Coffee

    clock

    9:00

    Chairman's Opening Remarks

    Randy Milbert

    Randy Milbert, President, Primordial

    clock

    9:10

    FUTURE FORCE WARRIOR

    Senior Representative

    Senior Representative, Future Force Warrior TPO, RDECOM, Natick Soldier Center, US Army

    clock

    9:50

    BALANCING CURRENT REQUIREMENTS WITH FUTURE CAPABILITY DEVELOPMENT

    Colonel (Ret'd) Vince Goulding

    Colonel (Ret'd) Vince Goulding, Director, Sea Viking Division, US Marine Corps War Fighting Laboratory, US Marine Corps

  • Role of experimentation (Sea Viking Series)
  • What experimentation and combat lessons learned are telling us
  • Enhancing today's Marine for tomorrow's fight
  • Future requirements and challenges
  • Human performance and virtual training
  • clock

    10:30

    Morning Coffee

    clock

    11:00

    THE BENEFITS OF UNMANNED LAND SYSTEMS TECHNOLOGY FOR THE NEXT GENERATION SOLDIER

    Tim Young

    Tim Young, Head of Unmanned Land Systems, QinetiQ

  • Next generation warfare
  • Problems associated with urban warfare
  • Urban warfare robotics requirements
  • Urban warfare robotics missions
  • QinetiQ-Foster-Miller robotics
  • Urban warfare robotics concept
  • Conclusions
  • clock

    11:40

    INTERACTIVE PANEL DISCUSSION

    Per-Eric Gustavsson

    Per-Eric Gustavsson, Chairman, MARKUS Project, Swedish Armed Forces

    Colonel (Ret'd) Vince Goulding

    Colonel (Ret'd) Vince Goulding, Director, Sea Viking Division, US Marine Corps War Fighting Laboratory, US Marine Corps

    Eric Michiels

    Eric Michiels , Directorate General Material Resources, Communication and Information Systems Division, Operations C3 Systems and Deployable Systems Section, Belgian Army

    Tim Young

    Tim Young, Head of Unmanned Land Systems, QinetiQ

    clock

    12:20

    Networking Lunch

    clock

    14:00

    IMPACT OF NANOTECHNOLOGY ON SOLDIERS

    Philippe van Nedervelde

    Philippe van Nedervelde, Executive Director, Foresight Nanotech Institute Europe

  • Where are we with nanotech? Synoptic overview of the state of the art
  • Near-term: upgrades w. subtle & gradual impact -- lighter, tighter, faster, simpler, stronger, safer… and more comfortable
  • Medium-term: invisible foes -- deadlier battlefields & booby-traps
  • Accelerating Nano-Bio-Info-Cogno convergence yields exponentially increasing Asymmetric Destructive Capability (ADC)
  • Longer-term: the disappearing soldier – soldier-bots & bunkers
  • Mutually Assured Permanent & Pervasive Surveillance (MAPPS) to smoothen dangers-fraught transitions
  • clock

    14:40

    REDUCED WEIGHT THROUGH NANOTECHNOLOGY

  • Lightweight protective clothes
  • Lightweight helmet
  • Lightweight power
  • Lightweight weapon systems
  • Frank  Simonis

    Frank Simonis, Director, Future Technology Centre, TNO

    Steven Schilthuizen

    Steven Schilthuizen, , TNO Netherlands

    clock

    15:20

    MATERIALS, (NANO)TECHNOLOGY AND THE SOLDIER

    Steven Savage

    Steven Savage, Deputy Research Director, Department of Functional Materials, Swedish Defence Research Agency

  • Examples: advanced materials and (nano)technology can make an important contribution to equipment for the future soldier
  • New materials and material concepts will be essential for the soldier to function effectively, and to survive in the dynamic situations likely to be met on future missions
  • The soldier and his/her equipment will be considered as a complete concept, where power, protection, camouflage, health monitoring, logistics and other functions are considered as a whole
  • Ethical aspects and possible legal requirements of the future mission, which may affect the materiel and equipment needed
  • soldier power
  • protection
  • health monitoring
  • logistics
  • accessories
  • clock

    16:00

    Chairman’s Closing followed by afternoon Tea

    clock

    16:10

    Close of Conference

    The Hatton, at etc. venues

    51/53 Hatton Garden
    London EC1N 8HN
    United Kingdom

    The Hatton, at etc. venues

    HOTEL BOOKING FORM

    Title

    SubTitle
    speaker image

    Content


    Title


    Description

    Download

    Title


    Description

    Download

    Title


    Description


    Download


    WHAT IS CPD?

    CPD stands for Continuing Professional Development’. It is essentially a philosophy, which maintains that in order to be effective, learning should be organised and structured. The most common definition is:

    ‘A commitment to structured skills and knowledge enhancement for Personal or Professional competence’

    CPD is a common requirement of individual membership with professional bodies and Institutes. Increasingly, employers also expect their staff to undertake regular CPD activities.

    Undertaken over a period of time, CPD ensures that educational qualifications do not become obsolete, and allows for best practice and professional standards to be upheld.

    CPD can be undertaken through a variety of learning activities including instructor led training courses, seminars and conferences, e:learning modules or structured reading.

    CPD AND PROFESSIONAL INSTITUTES

    There are approximately 470 institutes in the UK across all industry sectors, with a collective membership of circa 4 million professionals, and they all expect their members to undertake CPD.

    For some institutes undertaking CPD is mandatory e.g. accountancy and law, and linked to a licence to practice, for others it’s obligatory. By ensuring that their members undertake CPD, the professional bodies seek to ensure that professional standards, legislative awareness and ethical practices are maintained.

    CPD Schemes often run over the period of a year and the institutes generally provide online tools for their members to record and reflect on their CPD activities.

    TYPICAL CPD SCHEMES AND RECORDING OF CPD (CPD points and hours)

    Professional bodies and Institutes CPD schemes are either structured as ‘Input’ or ‘Output’ based.

    ‘Input’ based schemes list a precise number of CPD hours that individuals must achieve within a given time period. These schemes can also use different ‘currencies’ such as points, merits, units or credits, where an individual must accumulate the number required. These currencies are usually based on time i.e. 1 CPD point = 1 hour of learning.

    ‘Output’ based schemes are learner centred. They require individuals to set learning goals that align to professional competencies, or personal development objectives. These schemes also list different ways to achieve the learning goals e.g. training courses, seminars or e:learning, which enables an individual to complete their CPD through their preferred mode of learning.

    The majority of Input and Output based schemes actively encourage individuals to seek appropriate CPD activities independently.

    As a formal provider of CPD certified activities, SAE Media Group can provide an indication of the learning benefit gained and the typical completion. However, it is ultimately the responsibility of the delegate to evaluate their learning, and record it correctly in line with their professional body’s or employers requirements.

    GLOBAL CPD

    Increasingly, international and emerging markets are ‘professionalising’ their workforces and looking to the UK to benchmark educational standards. The undertaking of CPD is now increasingly expected of any individual employed within today’s global marketplace.

    CPD Certificates

    We can provide a certificate for all our accredited events. To request a CPD certificate for a conference , workshop, master classes you have attended please email events@saemediagroup.com

    Event Title

    Headline

    Text
    Read More

    I would like to speak at an event

    I would like to attend an event

    I would like to sponsor/exhibit at an event

    SIGN UP OR LOGIN

    Sign up
    Forgotten Password?

    Contact SAE Media Group

    UK Office
    Opening Hours: 9.00 - 17.30 (local time)
    SAE Media Group , Ground Floor, India House, 45 Curlew Street, London, SE1 2ND, United Kingdom
    Tel: +44 (0) 20 7827 6000 Fax: +44 (0) 20 7827 6001
    Website: http://www.smgconferences.com Email: events@saemediagroup.com
    Registered in England - SMi Group Ltd trading as SAE Media Group




    Forgotten Password

    Please enter the email address you registered with. We will email you a new password.

    Thank you for visiting our event

    If you would like to receive further information about our events, please fill out the information below.

    By ticking above you are consenting to receive information by email from SAE Media Group.
    Full details of our privacy policy can be found here https://www.smgconferences.com/privacy-legals/privacy-policy/.
    Should you wish to update your contact preferences at any time you can contact us at data@smgconferences.com.
    Should you wish to be removed from any future mailing lists please click on the following link http://www.smgconferences.com/opt-out

    Fill in your details to download the brochure

    By submitting this form you agree to our privacy policy and consent to receiving communications, you may opt out at any time.